98 Custom  Accessories
All JCS Accessories for Tippmann 98 products are ACT compatible.

Click Image

Description

Product #

Price

Jet Click™ shaft & ratchet
Hi-Performance upgrade
 for Cyclone Feeders
works with 98, A5, X7 Cyclones
Stop rubbing plastic on plastic... Get the JCS Jet Click shaft & ratchet kit! Features a custom curved ratchet design that minimizes the force to index the cyclone feeder. Brass wear bushings take the abuse of moving parts and not the plastic. Includes shaft, ratchet, stainless hardware, two precision machined brass bushings, one year warranty. instructions

69322
Kit

69319
replacement bushings

JCS Red Hot Power Tube™ for 98 Platinum's
R/T-Cyclone Hole: Yes  FVA: Yes
works with 98 Platinum's Markers Only
drop-in replacement of stock power tube
The Red Hot Power Tube accessory from JCS is a red anodized aluminum power tube. Direct replacement for the stock plastic power tube in the 98 Custom Platinum series. The JCS tube is precision machined aircraft aluminum, then red anodized. Our tight fitting front velocity screw design keeps your front velocity set no matter how hard you play! Use with stock valve and internals. Includes one power tube and one Hexadecagon front bolt.

75131

JCS 98 Blew Tube™ - Blue
R/T-Cyclone Hole: Yes  FVA: Yes
works with 98 Markers (not Platinum seriers)
direct replacement of stock power tube
The JCS Blew Tube replaces stock 98 Power Tubes. Features a protective "blew" anodized finish. Micro-finish aircraft aluminum and Delrin Hexadecagon front bolt. Provides an additional edge on performance and air usage. Requires tools that already came with your marker for installation. Nothing extra to buy. Includes one tube, one bolt, and one year warranty. Caution: The 98 brass nipples are threaded on. Use only 5 inch-pounds torque when tightening r/t-cyclone brass nipple.

75146

eTube™ GOLD Power Tube
R/T-Cyclone Hole: No  FVA: No
works with 98 Markers (not Platinum seriers)
This tube is for users with custom applications.
Not intended for new users. For users with custom marker setups. The eTube™ GOLD is for experience users who modify their 98 Customs with electronic triggers and low pressure kits. Just remove the plastic stock power tube and replace with this one. The velocity adjustment hole is removed and the R/T response trigger gas hole is removed. Removing these features provides a little extra edge experienced players desire. THIS ITEM SHOULD NOT BE USED WITHOUT A VELOCITY CONTROLLING DEVICE INSTALLED ON THE MARKER, SUCH AS JCS #66149.  Therefore, JCS does not recommend this item for new players. Instead, buy item 75146.
This product is a specialty item and does not work with all gun setups.

75145

designed for custom applications

Note: This tube does not have the brass nipple shown.

JCS 98 LTube™ no R/T hole- SILVER
RT-Cyclone Hole: No  FVA: Yes
works with 98 Markers (not Platinum seriers)
This tube is for users with custom applications.
Not intended for new users. For users with custom marker setups. The LTube™ is for experience users who modify their 98 Customs with accessories like electronic triggers and low pressure kits. The plastic stock power tube is replaced with this one. Response trigger gas hole is removed. Removing this feature provides a little extra edge experienced players appreciate.
This product is a specialty item and does not work with all gun setups.

75148

designed for custom applications

JCS 98 LTube™ no FVA- SILVER
RT-Cyclone Hole: Yes  FVA: No
works with 98 Markers (not Platinum seriers)
This tube is for users with custom applications.
Not intended for new users. For users with custom marker setups. The LTube™ is for experience users who modify their 98 Customs with accessories like electronic triggers and low pressure kits. The plastic stock power tube is replaced with this one. Response trigger gas hole is removed. Removing this feature provides a little extra edge experienced players appreciate.THIS ITEM SHOULD NOT BE USED WITHOUT A VELOCITY CONTROLLING DEVICE INSTALLED ON THE MARKER, SUCH AS JCS #66149.  Therefore, JCS does not recommend this item for new players. Instead, buy item 75146.
This product is a specialty item and does not work with all gun setups. Caution: The 98 brass nipples are threaded on. Use only 5 inch-pounds torque when tightening r/t-cyclone brass nipple.

75147

designed for custom applications

JCS 98 RVA
A.C.T. compatible
Adjusts Rear Bolt Spring
Optimize your air usage and increase your marker performance with this RVA by JCS >>> The JCS RVA for 98's is set apart from the rest because it has two mounting holes for JCS Folding Stock Upgrades 66174 Combat, 66172 MP, and 66173 VooDoo! Includes mounting hardware for JCS stocks.
 learn more here <-- recent updates

66149

on marker

JCS Bi-Pod
fits any barrel 7/8" dia to 1" dia
Black Anodized. Clamps securely to any barrel that is 7/8" diameter up to 1inch diameter. Leg are adjustable from about 6" to 9-1/2". Only weighs 200g (or 0.44 pound). Tools required for assembly are a 5/32 allen wrench and a 3/8 socket.

73355

JCS 7/8 Accessory Rails Mounts for ANY 3/8 dovetail of ANY paintball marker

Check'em Out!

GO TO RAIL Mounts

JCS 98 RVA Combat Folding Stock^TM
this stock with RVA
This stock has the 'best of both worlds'. Optimize your air usage, increase marker performance and increase your accuracy. The JCS RVA Folding Stocks are dropped about one inch lower than regular JCS Folding Stocks. Also available in our VooDoo model too!  ONLY weighs about one pound and is precision machined from aircraft grade aluminum bar stock. Black anodized.

66187

more images:
insert, inserts

This RVA stock is now available with the option of the new "771 Series" hinge invented by Blackpoint. The 771 series hinge allows locking the stock at an angle in the open position. Interchangeable angle blocks 0, 10, 12, 14, 16, 18, and 20 degrees are included. 

77164
 

on marker

JCS 98 Combat Folding Stock^TM  
this stock without RVA
 ONLY weighs about one pound and is precision machined from aircraft grade aluminum bar stock.  Black Anodized.

66192

JCS 98 RVA VooDoo Stock
this stock with RVA
This stock has the 'best of both worlds'. Optimize your air usage, increase marker performance and increase your accuracy. The JCS RVA Folding Stocks are dropped about one inch lower than regular JCS Folding Stocks. Also available in our Combat model!  ONLY weighs about one pound and is precision machined from aircraft grade aluminum bar stock. Black anodized.  

66188

more images:
insert, inserts

This RVA stock is now available with the option of the new "771 Series" hinge invented by Blackpoint. The 771 series hinge allows locking the stock at an angle in the open position. Interchangeable angle blocks 0, 10, 12, 14, 16, 18, and 20 degrees are included. 

77165
 

JCS 98 VooDoo Folding Stock^TM
this stock without RVA
 ONLY weighs about one pound and is precision machined from aircraft grade aluminum bar stock.  Black Anodized. RVA (rear velocity adjuster) built in.

 66193

Combat Folding Stock^TM  
fits Most Any Marker that accepts a drop forward -Steve's original invented in 2000! Current model has updated gun mount bracket.
Black Anodized aircraft aluminum 6591533

66190

on stock

Stock Drop Block
for JCS Stocks and RVA's
This curved block and screws allows you to mount JCS stocks to the bottom of RVA's or drop your existing about 1 inch. Includes black saddle block and two 10-32 x 3/4 long SHCS. 5/32 Allen wrench required. Works with ANY UPPER-MOUNTED JCS folding stock: 66177, 66192, 66195. See pictures to left for use.

71364

xShort^TM  5" Long Barrel   
for the Tippmann 98 Customs
available Black Anodized or Non-Anodized
Micro Honed to .687 to .691

67801 

A-5 to 98 Barrel Adapter
Mount an A-5 barrel on a 98 Marker
Provides the minimum material needed to accurately make the connection without any decline in accuracy or performance. Black anodized aircraft aluminum.

71804

98 to 98 Barrel Adapter
fits ANY 98 Barrel and Accepts ANY 98 Barrel
Tippmann made a thread improvement change on their 98 markers. This adapter works any direction with any properly threaded 98 barrel. Basically, if you try a new 98 barrel thread in an older (pre serial number 495,000) it may not work. This adapter provides the minimum material needed to accurately make the connection without any decline in accuracy. Black anodized aircraft aluminum. Guaranteed to work with GTA products from Tippmann. We do not test all products from all manufacturers.

71802

PMI / Spyder to 98 Barrel Adapter
Mount a Spyder barrel to 98 Marker
This adapter includes the improvements Tippmann made to 98 markers. Accepts PMI / Spyder barrels and provides the minimum material needed to accurately make the connection without any decline in accuracy or performance. Black anodized aircraft aluminum.

71820

JCS-paintball products by Blackpoint !