X7
Accessories
JCS Hi-Performance Paintball Products™
PLEASE READ OUR WARRANTY /
DISCLAIMER BEFORE PURCHASING OR USING OUR PAINTBALL PRODUCTS. |
|
 |
|
Click-Image |
Description |
Product # |
Price |
|
|
|
 |
Jet Click™
shaft & ratchet
Hi-Performance upgrade
for Cyclone Feeders
works with 98, A5, X7 Cyclones
Stop rubbing plastic
on plastic... Get the JCS Jet Click shaft & ratchet kit! Features a custom
curved ratchet design that minimizes the force to index the cyclone feeder.
Brass wear bushings take the abuse of moving parts and not the plastic. Includes
shaft, ratchet, stainless hardware, two precision machined brass bushings,
one year warranty.
instructions
Some Helpful Tips:
-
Use lighter weight stainless steel spring we provide with the
Click.
-
Un-bend "anti reversing" stock spring. It's the bent wire spring
that contact the teeth. It should press lightly against the
click, but not loose.
-
1-2 drop of lube at bearing and ratchet.
|
69322
Kit
69319
replacement bushings |
|
|
|
|
photo 2 |
 JCS X7 RVA
for Tippmann X7 markers
The JCS X7 RVA (Rear
Velocity Adjuster) allows the user to fine-tune the rear bolt spring
pressure. Features black anodized aluminum, preset-resistance stainless
steel adjusting screw, and tapped holes ready to accept any JCS folding
stock upgrade! Uses a 3/32 Allen Wrench to adjust, included. |
77121 |
|
|
|
|
profile image
top view
angled
more images:
insert,
inserts |
JCS X7 RVA
Combat Folding Stock TM
771 series
folding stock includes 77121
The original JCS X7 COMBAT folding stock
by the inventor, Blackpoint! Features the new "771" series hinge design. The
771 hinge allows users to change the open position of the folding stock from
straight to more than 10 degrees angle offset. This allows you to sight your
target with an upright natural posture. With the RVA, you will optimize your air usage
and increase
performance. Only weighing about a pound, this stock is precision
machined from aircraft grade aluminum bar stock. Black anodized. US Patent
6591533 |
77160
 |
|
|
|
|
profile image
top view
angled
more images:
insert,
inserts |
JCS
X7 RVA VooDoo Folding Stock TM
771 series
folding stock includes 77121
Optimize your air usage, increase marker
performance and increase your accuracy. The JCS RVA Folding Stocks are
dropped about one inch lower than regular JCS Folding Stocks. ONLY weighs about one pound and is
precision machined from aircraft grade aluminum bar stock. Black anodized.
US Patent 6591533 |
77161
|
|
|
|
|
 |
JCS Red Hot Power Tube™
fits A5 or X7
R/T-Cyclone Hole: Yes
FVA: Yes
works with ALL A5 or X7 Markers**
drop-in replacement of stock power tube
The Red Hot Power Tube accessory
from JCS is a red anodized aluminum power tube. Direct replacement for the
stock plastic power tube in the A5 or X7. The JCS tube is precision machined aircraft
aluminum, then red anodized. Our tight fitting front velocity screw design
keeps your front velocity set no matter how hard you play! Use with stock valve and internals. Includes
one power tube and one Hexadecagon front bolt.
**Note: Our most popular tube -
updated ! Keeping up with latest revisions from original equipment
manufacturers. This tube is backwards compatible with all A5's and X7's. |
75155 |
|
|
|
|
 |
JCS Hexadecagon™
Front Bolt
works with ALL A5, X7, and 98 Markers
Features 16 sided machined front
bolt with generous chamfer at the nose. Provides improved front bolt to ball
contact and more balanced air distribution to the ball when fired. |
75102 |
|
|
|
|
 |
JCS Gold P/T Special for A5 or X7 no FVA
R/T-Cyclone Hole: Yes
FVA: No
aka "Goldmember" for A5
or X7 Markers
This tube is for users with custom
applications.
Not intended for new users. For users with custom marker
setups. The GOLD P/T Special NO FVA. Constructed like #75155, but gold
anodized. It DOES NOT HAVE a front velocity adjuster. If your marker is
setup with the front velocity adjuster (F.V.A.) full open, this product is
for you. THIS ITEM SHOULD NOT BE USED WITHOUT A
VELOCITY CONTROLLING DEVICE INSTALLED ON THE MARKER, SUCH AS JCS #66148 and
a regulator.
Therefore, JCS does not recommend this item for new players. Instead, buy
item 75155, which has velocity control.
This product is a
specialty item and does not work with all gun setups. |
75166 |
designed for
custom applications
special order
ships on time
|
|
|
|
 |
JCS Power Tube™ no R/T hole, with FVA -
SILVER
R/T-Cyclone Hole: No
FVA: Yes
for A5 or X7 Markers
This tube is for users with custom
applications.
THIS WILL NOT WORK ON ALL A5's or X7's.
This is the same as our original
red hot #75155, but DOES NOT HAVE the R/T - cyclone feed air hole. Especially built for A5
or X7
users who bypass the stock cyclone feed system. (Usually players who mod
their gun to use the Q-Loader system.)
This product is a
specialty item and does not work with all gun setups. |
75156 |
designed for
custom applications
special order
ships on time
|
|
|
|
|
JCS SILVER eTube™ no FVA no R/T hole
R/T-Cyclone Hole: No
FVA: No
for A5 or X7 Markers
This tube is for users with custom
applications.
THIS WILL NOT WORK ON ALL A5's or X7's.
This is the same as our original
gold #75166, but does not have the R/T hole. Especially built for A-5
users with low-pressure setups that bypass the stock cyclone feed system.
THIS ITEM SHOULD NOT BE USED WITHOUT A VELOCITY
CONTROLLING DEVICE INSTALLED ON THE MARKER, SUCH AS JCS #66148 and a
regulator. Therefore, JCS does not recommend this item for new players.
Instead, buy item 75155, which has velocity control.
This product is a
specialty item and does not work with all gun setups.
|
75167 |
designed for
custom applications
special order
ships on time
|
|
|
